Videoprojection film (SCR360)

Product detail


Videoprojection film (SCR360)

$197.00

The Rear Projection Film is a self-adhesive film that can transform any window or glass partition into a display screen when projecting a video on the surface, using a projector. It will provide a bright and clear picture, visible from both sides of the glass.

This film can be used in offices, as well as a signage display for shops or to be used during events and exhibitions.

Expected durability
The expected vertical outdoor durability of the unprocessed product in central Europe (Zone 1) is up to: 5 years.
This information is based on successful real life experience.
Note : Exposure to severe temperatures and ultraviolet light, as well as conditions in Southern European countries, and also in tropical, sub-tropical or desert regions, will cause a more rapid deterioration. This also applies to polluted areas, high altitude, horizontal and/or south-facing exposure.

Video projection
The quality of the projected image will also depend on the power of the projector used.
For a rear projection indoors, we recommend to use a projector with a power of minimum 2.000 lumen per m2.
For a rear projection on an external window, a minimum of 6.000 lumen per m2 is recommended, and in direct sunlight, an intensity of min 8.000 lumen per sqm is required.

APPLICATION METHOD
The glass surface to be glued on has to be free from dust, grease or other contaminants. Some specific materials such as polycarbonate can cause air bubble problems. Therefore, a compatibility test is recommended. For more precision we recommend to refer back to the application table.

PRODUCTION AND STANDARDS
In order to constantly improve our production we may change a product colour and manufacturing process without prior notice. Before applying our products we recommend that our users ensure that the film is suitable for the intended use and comply with current standards.
In order to maintain the high level of quality, we do not recommend mixing different film productions when applying films

CHARACTERISTICS
Material : PET 100 microns
Adhesive : acrylic polymer 17 gr/m²
Protector : PET 23 microns
Color : colorless
Application face : internal
UVA cut : 99%
Visible Light Transmission: 88%
T° of application : min. + 5°C
Fire rating : B-s1,d0
Standards : EUROCLASSES

Questions about this or other products?

Don’t hesitate and ask your question. We’ll be happy to answer!


© Copyright – Dantasy Foils. All rights reserved. Consult our privacy policy.